Glossary entry (derived from question below)
English term or phrase:
sodium loops
Slovak translation:
sodíkové cirkulačné slučky
Added to glossary by
Andrea Demovič
Nov 20, 2004 11:24
19 yrs ago
English term
Slovakia
sodium loops
English to Slovak
Tech/Engineering
Engineering: Industrial
I do not have much context to it, but probably it should be some kind of equipment used in nuclear reactors, or as a testing device of some kind.
Thank you for any suggestions
Ivan
Thank you for any suggestions
Ivan
Proposed translations
(Slovak)
| 2 +1 | sodikove klucky |
Andrea Demovič
|
Proposed translations
+1
1 hr
Andrea Demovič
Native in Slovak
Accurate, reliable, professional.
Native in: Slovak 
Works in: English to Slovak, Slovak to English, Czech to English
Related KudoZ points
:
4
Selected
sodikove klucky
vid web stranku na objasnenie.
I hope it is what you are looking for.
Sodium coolant is pumped into the reactor under the core (see sodium inlet pipe right) at a temperature of 397°C and flows upwards through the core leaving by the outlet pipe (left) at a temperature of 529°C. There are three loops which supply and remove sodium; these are called the Primary Loops.
--------------------------------------------------
Note added at 2 hrs 40 mins (2004-11-20 14:05:12 GMT)
--------------------------------------------------
Podla obrazka reaktora sa javi, ze potrubia cez ktore je sodik vpustany a potom vypustany su zahnute ako tzv. klucky.
--------------------------------------------------
Note added at 4 hrs 38 mins (2004-11-20 16:03:24 GMT)
--------------------------------------------------
\'Loop\' sa preklada aj ako cyklus.
(Prepac, ze pridavam informacie potroske. Snazim sa pomoct popri mojej praci.)
--------------------------------------------------
Note added at 5 hrs 16 mins (2004-11-20 16:41:04 GMT)
--------------------------------------------------
The Primary Sodium Loops
The design of primary sodium loops is made more complicated because allowance has to be made for the dimensional changes which take place due to thermal expansion as the reactor is taken from the shut-down \"cold\" state up to full power. For this reason there are additional pipe bends to accommodate the expansion. The picture above is from a computer simulation of the reactor and primary loops.
(pozri si obrazok)
Vhodne slova na preklad \'sodium loops\' - sodikom chladene potrubia, sodikom chladene potrubne slucky, sodikom chladene spiraly.
--------------------------------------------------
Note added at 5 hrs 23 mins (2004-11-20 16:48:17 GMT)
--------------------------------------------------
Prepac, opravujem sa: \'sodium loops\' - potrubne slucky, spiraly , cirkulacne slucky, slucky na cirkulaciu sodika!!!
--------------------------------------------------
Note added at 5 hrs 25 mins (2004-11-20 16:49:54 GMT)
--------------------------------------------------
http://fel.utc.sk/~hockicko/semestralky/prace/p20/VyrobaEle....
I hope it is what you are looking for.
Sodium coolant is pumped into the reactor under the core (see sodium inlet pipe right) at a temperature of 397°C and flows upwards through the core leaving by the outlet pipe (left) at a temperature of 529°C. There are three loops which supply and remove sodium; these are called the Primary Loops.
--------------------------------------------------
Note added at 2 hrs 40 mins (2004-11-20 14:05:12 GMT)
--------------------------------------------------
Podla obrazka reaktora sa javi, ze potrubia cez ktore je sodik vpustany a potom vypustany su zahnute ako tzv. klucky.
--------------------------------------------------
Note added at 4 hrs 38 mins (2004-11-20 16:03:24 GMT)
--------------------------------------------------
\'Loop\' sa preklada aj ako cyklus.
(Prepac, ze pridavam informacie potroske. Snazim sa pomoct popri mojej praci.)
--------------------------------------------------
Note added at 5 hrs 16 mins (2004-11-20 16:41:04 GMT)
--------------------------------------------------
The Primary Sodium Loops
The design of primary sodium loops is made more complicated because allowance has to be made for the dimensional changes which take place due to thermal expansion as the reactor is taken from the shut-down \"cold\" state up to full power. For this reason there are additional pipe bends to accommodate the expansion. The picture above is from a computer simulation of the reactor and primary loops.
(pozri si obrazok)
Vhodne slova na preklad \'sodium loops\' - sodikom chladene potrubia, sodikom chladene potrubne slucky, sodikom chladene spiraly.
--------------------------------------------------
Note added at 5 hrs 23 mins (2004-11-20 16:48:17 GMT)
--------------------------------------------------
Prepac, opravujem sa: \'sodium loops\' - potrubne slucky, spiraly , cirkulacne slucky, slucky na cirkulaciu sodika!!!
--------------------------------------------------
Note added at 5 hrs 25 mins (2004-11-20 16:49:54 GMT)
--------------------------------------------------
http://fel.utc.sk/~hockicko/semestralky/prace/p20/VyrobaEle....
4 KudoZ points awarded for this answer.
Comment: "Graceful thanks..."
Something went wrong...