Jan 18, 2023 11:38
1 yr ago
48 viewers *
English term
ohm (as a verb)
English to French
Other
Mechanics / Mech Engineering
An issue is suspected on the Ethernet 1 circuit preventing the GX55 from communicating with the MCX1 controller and therefore causing 3DMC to boot up into simulation mode.
Using a multimeter, ohm the 4 wires for Ethernet 1 between the GX55 connector and the MCX1 controller.
Je n'ai jamais entendu parler de "ohmer".................. ?
Merci d'avance
Using a multimeter, ohm the 4 wires for Ethernet 1 between the GX55 connector and the MCX1 controller.
Je n'ai jamais entendu parler de "ohmer".................. ?
Merci d'avance
Proposed translations
(French)
4 | mesurer/mesurez la résistance (ohms) des 4 fils | Philippe Maillard |
3 +3 | mesurer la résistance avec un ohmmètre | Thomas T. Frost |
3 | vérifier la continuité | Tony M |
Change log
Jan 18, 2023 11:42: writeaway changed "Language pair" from "French" to "English to French"
Proposed translations
17 mins
Selected
mesurer/mesurez la résistance (ohms) des 4 fils
-
4 KudoZ points awarded for this answer.
Comment: "Merci"
+3
16 mins
English term (edited):
using a multimeter, ohm
mesurer la résistance avec un ohmmètre
It must be about using a multimeter (which usually includes an ohmmeter function) to measure the electrical resistance to find out if there is a fault on the wire.
Peer comment(s):
agree |
Daryo
20 mins
|
Thanks
|
|
agree |
Lucas Pocis
3 hrs
|
Thanks.
|
|
agree |
Tony M
: Yes, of course! Though I suspect here it really means simply a continuity check...
5 hrs
|
Thanks. Yes, check there is an unhindered connection, so if the resistance is not close to 0, there is a problem.
|
5 hrs
English term (edited):
ohm
vérifier la continuité
Almost certainly what it is intended to mean here: achieved, of course, using an ohm-meter
Discussion
Juste une suggestion.