Glossary entry (derived from question below)
Dec 19, 2005 23:01
18 yrs ago
Dutch term
aanspankoppel
Dutch to English
Tech/Engineering
Engineering (general)
Nuclear engineering manual.
Proposed translations
(English)
5 | torque | Davorka Grgic |
3 | initial torque | Dave Calderhead |
Proposed translations
9 mins
Selected
torque
...in in-lb or Nm. (I am a nuclear engineer.)
--------------------------------------------------
Note added at 16 mins (2005-12-19 23:17:51 GMT) Post-grading
--------------------------------------------------
Definition: the rotational equivalent of a force, calculated by multiplying the force causing rotation by the perpendicular distance from the line of action of the force to the centre of rotation. The unit is the newton metre.
--------------------------------------------------
Note added at 16 mins (2005-12-19 23:17:51 GMT) Post-grading
--------------------------------------------------
Definition: the rotational equivalent of a force, calculated by multiplying the force causing rotation by the perpendicular distance from the line of action of the force to the centre of rotation. The unit is the newton metre.
3 KudoZ points awarded for this answer.
Comment: "Thanks."
10 mins
initial torque
without more context, or startup torque
Green Motor Control
A lot of systems just cannot use all of that initial torque. ... Sometimes you
need every bit of usable torque possible during motor startup. ...
www.ganssle.com/articles/amotor.htm
--------------------------------------------------
Note added at 14 mins (2005-12-19 23:16:19 GMT) Post-grading
--------------------------------------------------
can also be applied to studs/nuts/bolts using an adjustable torque wrench -
I am not a nuclear engineer [nor am I Brad Pitt - so not trying to impress you much (;-)], but I did train as an engineer in the aircraft industry before politics 'shrunk' it.
Green Motor Control
A lot of systems just cannot use all of that initial torque. ... Sometimes you
need every bit of usable torque possible during motor startup. ...
www.ganssle.com/articles/amotor.htm
--------------------------------------------------
Note added at 14 mins (2005-12-19 23:16:19 GMT) Post-grading
--------------------------------------------------
can also be applied to studs/nuts/bolts using an adjustable torque wrench -
I am not a nuclear engineer [nor am I Brad Pitt - so not trying to impress you much (;-)], but I did train as an engineer in the aircraft industry before politics 'shrunk' it.
Discussion
Het is normaal dat de hoge druk enigszins naar beneden gaat wanneer het aanspankoppel op de M16 studs wordt uitgeoefend.